Frequently Asked Questions

How much does epoxy flooring cost in Athens, Alabama?

Each floor is priced on its own: area, the prep the concrete needs, any moisture work, and the system and finish. Flake broadcasts and heavy repairs add to the total. Request a free estimate to get a number for your space.

Is epoxy flooring a good choice for a garage in North Alabama?

Yes, when the system is built for vehicles. Tennessee Valley summers are hot and humid, so a ground surface, a high-solids base and a tough topcoat matter more than the color. A thin rolled-on paint is the version that tends to peel.

How long does garage floor epoxy take to cure?

It runs in stages: walkable first, then ready for cars, then fully cured. Cooler or damper weather slows each stage. The product's data sheet sets the schedule, and you get it before the work starts.

Can epoxy flooring be installed over cracked concrete?

Hairline and stable cracks are routed out and filled before coating. Cracks that are still moving or heaving can telegraph through any coating, so those are discussed honestly at the estimate.

Will epoxy flooring become slippery when wet?

A smooth, glossy coat can be slick with water or oil on it. Flakes, a grit additive in the topcoat or a satin finish add grip, and the right amount depends on how wet the space gets.

Can epoxy flooring handle hot tires and vehicle traffic?

A properly prepared, multi-layer system can. Hot-tire lifting is mostly a problem with thin coatings on poorly prepared concrete, which is why garage floors start with grinding rather than etching.

What is the difference between epoxy flooring and concrete sealing?

Epoxy builds a thick colored layer on top of the slab and changes how it looks and feels. A sealer either soaks in or forms a thin clear film, keeping the concrete look. Coatings suit garages and interiors; sealers suit most outdoor concrete.

Do you serve Decatur, Madison, Rogersville, Capshaw, and Moulton?

Athens Epoxy Flooring's stated service area includes Athens, Decatur, Madison, Rogersville, Capshaw, and Moulton, Alabama. Project scheduling and service availability should be confirmed when requesting an estimate. Tell us the property location and the type of flooring work you need.

Are polyaspartic or polyurea topcoats available?

Those topcoats are available as part of a coating system where they suit the floor, for example in a sunny garage or where a faster return to use matters. The estimate explains the options.

Can you coat over an existing epoxy floor?

It depends on the bond. A sound old coating can be scuffed by grinding and recoated, while a peeling one is removed down to bare concrete.

How do I clean an epoxy floor?

Keep grit off with a soft broom, mop with warm water and a pH-neutral cleaner, and blot spills before they sit.

What hours are you available?

Phones are answered 9 am to 8 pm, seven days a week. The estimate form is open any time.